ESTeem 195Eg Uživatelský manuál stáhnout pdf (Strana 5)

From the Main Page select ESTeem Utilities and click on

Download ESTeem Discovery Utility.

Note: This program is saved in a compressed file format.

Microsoft Windows XP® will open the file directly, but

other operating systems will require a common

compression program such as WinZip available for

download at http://www.winzip.com

Double click on the 195EdiscoverySetup.exe file listed in

the window to install the program.

5. Set IP Address on the 195Eg. Connect the Model

195Eg to your computer either direct to the Ethernet

card or through a HUB/Switch using a CAT-5e

Ethernet cable. The Ethernet port on the 195Eg

supports Auto-Negotiation so either a patch cable or crossover cable will work. Open the ESTeem Discovery

Program and press the Discover Modems button. The Model 195Eg will be displayed in the program by the

Ethernet MAC address and Current IP Address (Figure 3).

Note: The SSID and Mode of Operation will be adjusted later in the configuration.

Double-click on the 195Eg you wish to program and the Configure IP Address window will be displayed

(Figure 4). Enter an IP address and Subnet Mask for the 195Eg that matches your network subnet and press

the OK button to save this to the ESTeem. You will receive notification that the Configuration was Successful

and the 195Eg will reboot. Proceed to ESTeem Setup to continue configuration.

Figure 2- ESTeem Utility Download

Figure 3 – Discovery Program Main Page

Figure 4 – Change IP Address Window

1 2 3 4 5 6 7 8 9 10 11 12

Žádné komentáře

ESTeem 195Eg Uživatelský manuál Strana 5